Rixson 370 Pivot Template Installation And Adjustment Guide

Rixson 370 pivot templates are an essential component in the installation of pivot hinges, providing a precise and secure way to hang doors. The correct installation and adjustment of these templates are crucial to ensure smooth door operation, safety, and durability. In this comprehensive guide, we will walk you through the step-by-step process of installing and adjusting Rixson 370 pivot templates.

The Importance of Proper Installation and Adjustment

Proper installation and adjustment of Rixson 370 pivot templates are vital to ensure the longevity and performance of the pivot hinge system. Incorrect installation can lead to door misalignment, uneven weight distribution, and increased wear on the hinge components. Moreover, a poorly installed pivot template can compromise the safety and security of the door, potentially leading to accidents or unauthorized access.

Pre-Installation Checklist

Before proceeding with the installation, make sure to:

• Read and understand the manufacturer's instructions and recommendations
• Verify the correct template size and type for your specific pivot hinge system
• Ensure the door and frame are properly prepared and aligned
• Gather all necessary tools and materials

Installation Steps

1. Locate the Pivot Point: Identify the center point of the pivot hinge, usually marked on the door and frame. This point will serve as a reference for the template installation.
2. Mark the Template Location: Use a pencil to mark the location of the template on the door and frame, ensuring it is centered on the pivot point.
3. Drill Pilot Holes: Drill pilot holes for the template screws, using a drill bit slightly smaller than the screw diameter.
4. Install the Template: Place the template over the pilot holes and screw it into position, ensuring it is securely fastened.

Adjustment Procedure

1. Check the Door Alignment: Verify the door is properly aligned with the frame, ensuring the pivot point is centered.
2. Loosen the Template Screws: Loosen the template screws to allow for adjustment.
3. Adjust the Template: Adjust the template to ensure proper alignment with the pivot point and door.
4. Tighten the Template Screws: Tighten the template screws in a star pattern to secure the template in place.

Tips and Best Practices

• Use a level to ensure the template is properly aligned and the door is plumb.
• Apply a small amount of lubricant to the pivot point to reduce friction and wear.
• Regularly inspect and maintain the pivot hinge system to ensure optimal performance.

Troubleshooting Common Issues

• Door Misalignment: Check the template installation and adjustment, ensuring proper alignment with the pivot point.
• Pivot Point Wear: Inspect the pivot point for signs of wear, replacing the bearing or pivot pin as needed.
• Template Looseness: Check the template screws, tightening them in a star pattern to secure the template.

Rixson 370 Pivot Template Installation and Adjustment Image Gallery

By following this comprehensive guide, you'll be able to successfully install and adjust Rixson 370 pivot templates, ensuring a secure and smooth door operation. Remember to regularly inspect and maintain the pivot hinge system to ensure optimal performance and longevity.