Intro
Streamline your installation process with the Von Duprin 996L installation template and instructions. Master the art of configuring exit devices with this comprehensive guide, featuring step-by-step instructions, troubleshooting tips, and expert advice on door hardware, panic bars, and exit devices.
The Von Duprin 996L is a popular panic device used in commercial settings to provide safe and secure exit solutions. Installing this device requires careful attention to detail and adherence to specific guidelines to ensure proper function and compliance with building codes. In this article, we will provide a comprehensive installation template and instructions for the Von Duprin 996L.
Pre-Installation Requirements
Before starting the installation process, it is essential to review the following requirements:
- Ensure the door and frame are compatible with the Von Duprin 996L device.
- Verify the door swing direction and handedness (left-hand or right-hand).
- Check the door width and ensure it is within the device's compatible range (up to 48 inches).
- Review local building codes and regulations regarding panic devices.
Tools and Materials Needed
- Von Duprin 996L device
- Door and frame
- Mounting screws
- Drill and bits
- Measuring tape
- Level
- Pencil and marker
Installation Steps
Follow these step-by-step instructions to install the Von Duprin 996L device:
- Mount the device: Hold the device against the door and mark the screw holes. Drill pilot holes and screw the device into place. Ensure the device is level and secure.
- Connect the push bar: Attach the push bar to the device, ensuring proper alignment and secure connection.
- Install the latch: Install the latch on the door frame, ensuring proper alignment and secure connection.
- Connect the strike: Connect the strike to the door frame, ensuring proper alignment and secure connection.
- Test the device: Test the device to ensure proper function and smooth operation.
Troubleshooting Common Issues
- Device not functioning: Check the connections and ensure the device is properly installed.
- Push bar not aligning: Adjust the push bar to ensure proper alignment.
- Latch not engaging: Check the latch alignment and adjust as necessary.
Post-Installation Requirements
After completing the installation, ensure the following:
- Inspect the device: Inspect the device to ensure proper installation and function.
- Test the device: Test the device to ensure smooth operation and proper function.
- Document the installation: Document the installation, including photos and notes, for future reference.
Conclusion and Final Checks
Before completing the installation, perform a final check to ensure:
- The device is properly installed and functioning.
- The door and frame are secure and properly aligned.
- All connections are secure and tightened.
By following these installation template and instructions, you can ensure a successful and secure installation of the Von Duprin 996L device.
Von Duprin 996L Installation Image Gallery
We hope this article has provided valuable insights and guidance for installing the Von Duprin 996L device. If you have any questions or need further assistance, please don't hesitate to comment below. Share your experiences and tips for installing panic devices in the comments section.